Quickie Groove Brushless TT build.

Power wheelchair board for REAL info!

POWERCHAIR MENU! www.wheelchairdriver.com/powerchair-stuff.htm

Re: Quickie Groove Brushless TT build.

Postby elryko1992 » 06 Dec 2017, 18:05

Ok thanks, maybe you found the thread.
User avatar
elryko1992
 
Posts: 223
Joined: 05 Aug 2016, 21:08
Location: Romania

Re: Quickie Groove Brushless TT build.

Postby hank » 06 Dec 2017, 21:47

When finished tweeking to get how i like it
will then strip down all bits for powdercoating.
Going for all matt/satin black look or may have white frame. :roll:
f55s bm1 clone.
quickie groove Brushless
BM3 clone
Foldawheel PW 1000 XL.
hank
 
Posts: 506
Joined: 22 Sep 2014, 13:21
Location: Derbyshire. uk

Re: Quickie Groove Brushless TT build.

Postby shirley_hkg » 07 Dec 2017, 02:23

NEED 10" rims for TT GB to go tubeless .

Saw this , and it's a good 14" tubeless candidate for GB , without losing torque . goodpost givebeer
Attachments
IMG-20171204-WA0005.jpg
IMG-20171204-WA0006.jpg
shirley_hkg
 
Posts: 1708
Joined: 31 Dec 2010, 13:42

Re: Quickie Groove Brushless TT build.

Postby Burgerman » 07 Dec 2017, 04:20

Too thin. He likes the fat tyres, smoother ride, less sinking...
User avatar
Burgerman
Site Admin
 
Posts: 39038
Joined: 27 May 2008, 21:24
Location: United Kingdom

Re: Quickie Groove Brushless TT build.

Postby hank » 07 Dec 2017, 10:19

Not for me shirley_hkg
but thanks :thumbup:
f55s bm1 clone.
quickie groove Brushless
BM3 clone
Foldawheel PW 1000 XL.
hank
 
Posts: 506
Joined: 22 Sep 2014, 13:21
Location: Derbyshire. uk

Re: Quickie Groove Brushless TT build.

Postby Burgerman » 07 Dec 2017, 13:14

Ends up 14.3 diameter. almost 4 wide. But very little sidewall.
User avatar
Burgerman
Site Admin
 
Posts: 39038
Joined: 27 May 2008, 21:24
Location: United Kingdom

Re: Quickie Groove Brushless TT build.

Postby hank » 22 Feb 2018, 23:38

DSC05034.JPG
DSC05034.JPG (92.36 KiB) Viewed 1052 times


Is there any way to disable freewheel levers on brushless motors
as one of mine has broke off level with casing
they are very brittle hollow plastic.

Could they be disabled with wiring or will have to remove lever arm part
inside casings first. :problem:
f55s bm1 clone.
quickie groove Brushless
BM3 clone
Foldawheel PW 1000 XL.
hank
 
Posts: 506
Joined: 22 Sep 2014, 13:21
Location: Derbyshire. uk

Re: Quickie Groove Brushless TT build.

Postby hank » 22 Feb 2018, 23:44

Wanted to blank them off with a cover plate if possible.
f55s bm1 clone.
quickie groove Brushless
BM3 clone
Foldawheel PW 1000 XL.
hank
 
Posts: 506
Joined: 22 Sep 2014, 13:21
Location: Derbyshire. uk

Re: Quickie Groove Brushless TT build.

Postby shirley_hkg » 23 Feb 2018, 01:47

YES , you can avoid the inhabit by just shorting that blue micro switch .

Another thing worth noting is the plastic linkage will get displaced after a dozen clicks of the solenoid . That will render you an ineffective parking brake .

I'll hot glue it . cheers
shirley_hkg
 
Posts: 1708
Joined: 31 Dec 2010, 13:42

Re: Quickie Groove Brushless TT build.

Postby hank » 23 Feb 2018, 14:48

I'll hot glue it . cheers

I take it you mean glue the broken part back together.
shirley :)
f55s bm1 clone.
quickie groove Brushless
BM3 clone
Foldawheel PW 1000 XL.
hank
 
Posts: 506
Joined: 22 Sep 2014, 13:21
Location: Derbyshire. uk

Re: Quickie Groove Brushless TT build.

Postby shirley_hkg » 23 Feb 2018, 15:14

hank wrote:
Is there any way to disable freewheel levers on brushless motors
as one of mine has broke off level with casing
they are very brittle hollow plastic.

Could they be disabled with wiring or will have to remove lever arm part
inside casings first. :problem:


NO, I mean you should find a way to prevent the plastic part from rotating (change to free wheel position by itself).

It is supposed to be held in place with a spring load linkage , but it is broken now .
shirley_hkg
 
Posts: 1708
Joined: 31 Dec 2010, 13:42

Re: Quickie Groove Brushless TT build.

Postby hank » 23 Feb 2018, 15:37

Shirley
Got you.
What i have done is made a alloy flat plate to cover over
casting hole area fixed on the original 4 screws.
put the lever in drive mode then cut the white freewheel
lever level to top face then covered with plate.
The lever cant move now.
Just lost freewheel access now. :thumbdown:
f55s bm1 clone.
quickie groove Brushless
BM3 clone
Foldawheel PW 1000 XL.
hank
 
Posts: 506
Joined: 22 Sep 2014, 13:21
Location: Derbyshire. uk

Re: Quickie Groove Brushless TT build.

Postby hank » 26 Jun 2018, 16:52

New backrest fitted with custom made alloy posts.
waiting for black etch primer for posts
Attachments
groove R BACKREST.jpg
groove R BACKREST.jpg (66.43 KiB) Viewed 273 times
f55s bm1 clone.
quickie groove Brushless
BM3 clone
Foldawheel PW 1000 XL.
hank
 
Posts: 506
Joined: 22 Sep 2014, 13:21
Location: Derbyshire. uk

Re: Quickie Groove Brushless TT build.

Postby Burgerman » 26 Jun 2018, 18:35

How about a larger pic from further away so we can see the chair? Several angles. Is this lithium yet?

And are you interested is spare motors, controller, lighting module, cables, unused rem550, etc? All with no broken plastic parts.
User avatar
Burgerman
Site Admin
 
Posts: 39038
Joined: 27 May 2008, 21:24
Location: United Kingdom

Re: Quickie Groove Brushless TT build.

Postby hank » 26 Jun 2018, 18:55

PM me prices and details. ;)
Will get more pics over weekend John.
Still lead slabs till dead :)
f55s bm1 clone.
quickie groove Brushless
BM3 clone
Foldawheel PW 1000 XL.
hank
 
Posts: 506
Joined: 22 Sep 2014, 13:21
Location: Derbyshire. uk

Re: Quickie Groove Brushless TT build.

Postby hank » 29 Jun 2018, 18:07

Latest picture of build
Power Wheelies easy :thumbup: :lol: :lol:
Attachments
IMG_E0562 1111.jpg
IMG_E0561 33333.jpg
f55s bm1 clone.
quickie groove Brushless
BM3 clone
Foldawheel PW 1000 XL.
hank
 
Posts: 506
Joined: 22 Sep 2014, 13:21
Location: Derbyshire. uk

Re: Quickie Groove Brushless TT build.

Postby Burgerman » 29 Jun 2018, 18:15

Very good. Basically a salsa. The reason you dont get brushless issues I did is because you are smaller and so lighter than me judging by the seating.
User avatar
Burgerman
Site Admin
 
Posts: 39038
Joined: 27 May 2008, 21:24
Location: United Kingdom

Re: Quickie Groove Brushless TT build.

Postby hank » 29 Jun 2018, 18:45

Thanks :thumbup: I am about 11 stone.
Happy with it apart from colour
Ordered some etch black and 2k clear coat for alloy parts.
Waiting for wide arm pads and setting joystick to my liking.
End plugs to fit in alloy box where i lifted battery box for more clearance.
and fit some in frame where holes show.
New cushion next as well.
General tidy up a few tweeks then,getting there slowly.
f55s bm1 clone.
quickie groove Brushless
BM3 clone
Foldawheel PW 1000 XL.
hank
 
Posts: 506
Joined: 22 Sep 2014, 13:21
Location: Derbyshire. uk

Re: Quickie Groove Brushless TT build.

Postby rover220 » 29 Jun 2018, 19:51

looking good.
rover220
 
Posts: 756
Joined: 10 Dec 2013, 19:34
Location: West Mids, UK

Re: Quickie Groove Brushless TT build.

Postby Burgerman » 29 Jun 2018, 20:03

Not that it matters at our speeds, but the rear tyres are reversed. :argument

Right way. The tread pattern is designed to clear water towards the outer edges as you hit it at high speed. So no aquaplaning at speed. Wont make a blind bit of difference on a powrchair! But evey motorcyclist will spot it... :shifty:
Attachments
810_1770.JPG
User avatar
Burgerman
Site Admin
 
Posts: 39038
Joined: 27 May 2008, 21:24
Location: United Kingdom

PreviousNext

Return to Everything Powerchair

Who is online

Users browsing this forum: flagman1776, Google [Bot], ICEUK, LROBBINS, Swan T.W. and 82 guests

 

  eXTReMe Tracker