Programming leads

No Commercial sellers please, unless of particular interest and with permission!

MAIN WEBSITE: www.wheelchairdriver.com

Re: Programming leads

Postby Burgerman » 16 Jan 2018, 14:04

Thanks!
User avatar
Burgerman
Site Admin
 
Posts: 37740
Joined: 27 May 2008, 21:24
Location: United Kingdom

Re: Programming leads

Postby Rolf,Meier » 10 Apr 2018, 20:21

Hello woodygb,

I've read the whole report so far. I need a cable for my VR2 controller. If I take this right out of the drawing I need a USB cable with FT232RL chip then a 47KOhm resistor and a diode and the XLR 3 pin connector.

On XLR plug:
pin 3 to RXD
Pin 3 to 47KOhm to 3,3V or 5V
pin 3 to diode to TXD
pin 2 to ground

On 4 Pin Molex Plug

Pin 1 Ground
pin 3 TX
pin 4 RX

Since my VR2 controller has no Molex connector. Do I have to use XLR plugs?
I also read that you do not send any software. is okay too. but maybe you can write me yes what software it is then I can search for myself.

So far I have found PGDT Rnet Programmer and PG Drivers Technology - Mobility Service PC Programmer.

If you prefer to make the cables yourself, I would buy one too

MFG Rolf


Image[/quote]
Rolf,Meier
 
Posts: 1
Joined: 10 Apr 2018, 19:49

Re: Programming leads

Postby woodygb » 11 Apr 2018, 10:33

Hi Rolf,

You will need the 3 pin XLR for the VR2 and the MOBILITY Software but NOT the SERVICE Version & not R-net.

The end of this thread has a better pic.

viewtopic.php?f=2&t=2111&start=1160#p117017
An expert is a person who has made all the mistakes that can be made in a very narrow field.
Niels Bohr
User avatar
woodygb
 
Posts: 5033
Joined: 12 Mar 2011, 18:45
Location: Bedford UK

Previous

Return to Buy/Sell Mobility Equipment

Who is online

Users browsing this forum: No registered users and 5 guests

 

  eXTReMe Tracker